FLASHFORGE CREATOR 4-A HT

Nuevo

Creator 4 is a multi-functional, flexible and high-performance commercial 3D printer. It is equipped with three types of extruders, therefore various printing needs can be met by selecting the matching printing module according to different types of filaments. This version is with the extruder – HT option that can print up to 320°C

Highlight

  • Large build area of 400mm x 350mm x 500mm
  • Independent Dual Extruder
  • Heated build chamber, 65°C
  • Print up to temperatures of 320°C
  • Heated build plate – 120°C
  • Smart filament management system
  • HEPA 13 air filter
  • Built-in-camera
  • Resume print after power loss
Caracteristicas técnicas  
Usable Filament Diameter 1.75 mm
Max Nozzle Temperature 320 ºC
Open Filament System Yes
Extruder Type direct drive
Printing Speed Best 200 mm/s
Build Area 400 mm x 350 mm x 500 mm
Build Plate Temp Max 120 ºC
Build Plate Material Flexible Steel Plate
Build Plate Attachment magnetic
Build Chamber During Process Open or Closed
Build Chamber Heated Yes, max 65°C
Filament Chamber Closed Yes
Extruder Number Of 2
Extruder Construction Type Dual IDEX - Independent Dual Extruders
Installation Space / Requirements  
Total Mass Overall Dimensions 840 mm x 675 mm x 1050 mm
Total Weight 90 kg
Ambient Operating Temperature 15°C - 30°C
Max Power Consumption 2320 W
Voltage AC: 100 V / 240 V, 30 A (50-60 Hz)
Equipment  
Hepa Filter Yes
Filament Runout Sensor Yes
Power Loss Fail Safe Yes
Touch Screen Yes
Camera Yes
Connection  
USB Port Yes
Ethernet Port Yes
WLAN Yes
Cloud Control Yes
Accuracy  
Layer Height 0.05 - 0.4 mm
Resolution 0.2 mm
Shipping  
Shipping Box 820 mm x 990 mm x 1260 mm
Shipping Weight 130 kg

Más detalles

Plazo de entrega en 5-6 días

7 800,00 €

Más información

Build area

The Creator 4 has a perfect build size for most applications. 400mm x 350mm x 500mm is ideal for prototype manufacturing.

Independtant Dual Extruder

Unlike traditional dual extruder, when one extruder prints, the other one is away from the model printing area, so that the filament will not drip and thus ruin the model quality. While printing the same model in batch, the output is doubled, which makes it the best choice for mass production.

Heated build chamber

The advanced thermal-control software design can preheat and keep the temperature before and after printing. The thermal-control system maintains a constant chamber temperature at 65℃, reducing the thermal contraction of the model through the printing process. It avoids the warpage and cracking of ABS/PC/PA and other engineering filaments and guarantees the quality and dimensional accuracy of the model, improving the success rate of printing.

High print temperature

With the included high temperature extruder you can print most filaments on the market today thanks to an operating temperature of 320°C Supported Filament:PC / PA / PP / PETG / ASA / ABS / PLA / PC-ABS / PAHT

Heated build plate

The build plate can be heated to a temperature of 120°C which makes prints of ABS, Nylon and similar materials easy.

Smart filament management

The advanced thermal-control software design can preheat and keep the temperature before and after printing. The thermal-control system maintains a constant chamber temperature at 65℃, reducing the thermal contraction of the model through the printing process. It avoids the warpage and cracking of ABS/PC/PA and other engineering filaments and guarantees the quality and dimensional accuracy of the model, improving the success rate of printing.

Clean air

The included HEPA 13 air filter makes sure that hazardous fumes and particles are removed before reaching the outside of the printer.

Camera control

The built-in-camera gives you the option to monitor the current print and see the progress

Resume from power loss

If your 3D printing stops, you can easily continue it with the Creality Ender 5 Plus. Save time, filament, and money from interrupted 3D prints.

Reseñas

No hay reseñas de clientes en este momento.

Escriba una reseña

FLASHFORGE CREATOR 4-A HT

FLASHFORGE CREATOR 4-A HT

Creator 4 is a multi-functional, flexible and high-performance commercial 3D printer. It is equipped with three types of extruders, therefore various printing needs can be met by selecting the matching printing module according to different types of filaments. This version is with the extruder – HT option that can print up to 320°C

Highlight

  • Large build area of 400mm x 350mm x 500mm
  • Independent Dual Extruder
  • Heated build chamber, 65°C
  • Print up to temperatures of 320°C
  • Heated build plate – 120°C
  • Smart filament management system
  • HEPA 13 air filter
  • Built-in-camera
  • Resume print after power loss
Caracteristicas técnicas  
Usable Filament Diameter 1.75 mm
Max Nozzle Temperature 320 ºC
Open Filament System Yes
Extruder Type direct drive
Printing Speed Best 200 mm/s
Build Area 400 mm x 350 mm x 500 mm
Build Plate Temp Max 120 ºC
Build Plate Material Flexible Steel Plate
Build Plate Attachment magnetic
Build Chamber During Process Open or Closed
Build Chamber Heated Yes, max 65°C
Filament Chamber Closed Yes
Extruder Number Of 2
Extruder Construction Type Dual IDEX - Independent Dual Extruders
Installation Space / Requirements  
Total Mass Overall Dimensions 840 mm x 675 mm x 1050 mm
Total Weight 90 kg
Ambient Operating Temperature 15°C - 30°C
Max Power Consumption 2320 W
Voltage AC: 100 V / 240 V, 30 A (50-60 Hz)
Equipment  
Hepa Filter Yes
Filament Runout Sensor Yes
Power Loss Fail Safe Yes
Touch Screen Yes
Camera Yes
Connection  
USB Port Yes
Ethernet Port Yes
WLAN Yes
Cloud Control Yes
Accuracy  
Layer Height 0.05 - 0.4 mm
Resolution 0.2 mm
Shipping  
Shipping Box 820 mm x 990 mm x 1260 mm
Shipping Weight 130 kg